Loading ...
Loading ...
Loading ...
102 - CLEANING AND MAINTENANCE 914779727/C
Programmed pyrolytic function
It is possible to program the Pyrolytic cycle start
time like all other cooking functions.
1. After confirming the desired pyrolytic
function duration, touch next to the expected
end time of the function.
2. Scroll with your finger to select a different
time for the pyrolytic function to finish.
3. Press the CONFIRM button to confirm.
The appliance waits until the set start time to start
the Pyrolytic function, showing the relevant
countdown.
End of Pyrolytic function
When the temperature inside the oven cavity
has fallen to safe levels and the door lock has
been deactivated, open the door and collect
the residues inside the oven cavity with a damp
microfibre cloth.
Descaling
Periodically the display will prompt you to
perform the boiler descaling procedure.
Reservoir filling
1. Mix 100 g of citric acid with 650 ml of
water in a jug.
2. Open the door and pull the loading drawer
out of its housing.
3. Insert the funnel provided in the loading
drawer.
4. Pour the water softener (using a bottle or a
measuring jug) until the reservoir max. level
indicator light (in the information area
on the right) shows that the max. level
has been reached .
5. At the end, remove the funnel and place the
loading drawer back in its place.
Boiler descaling function
1. Close the door
2. Descaling starts.
At the end of the descaling process the display
shows the request to drain the water softener.
Reservoir draining
1. Open the door.
2. Place the deep pan on the third shelf from
the bottom. Push it against the rear wall of
the oven cavity.
3. Touch the START button to start
draining the water softener.
The descaling solution starts to flow into the
deep pan from the drain pipe on the right side
of the rear wall of the oven cavity.
4. Wait for the end of the drain flow.
When finished, the reservoir indicator light
(in the information area on the right) and
If the pyrolytic cycle gives unsatisfactory
results at minimum duration, it is
recommended to set a longer time for
subsequent cleaning cycles.
It is not possible to select any function
once the door lock device has been
activated. It is still possible, however, to
switch off the appliance pressing the
ON-OFF button.
We recommend wearing rubber gloves
for these operations.
For easier manual cleaning of parts that
are difficult to reach, we recommend
removing the door.
The presence of scale due to lack of
descaling can compromise correct
operation of the appliance in the long
term.
Descaling is a long process (more than
one hour) that requires the user to be
present in front of the appliance.
We recommend performing descaling
every time this is indicated on the
display in order to keep the boiler in
perfect operating condition.
Depending on conditions, the system
will show if the appliance can perform
standard functions or if a descaling and
cleaning process of the hydraulic circuit
is required.
Do not use lactic acid or other
descaling agents.
Loading ...
Loading ...
Loading ...