Loading ...
Loading ...
Loading ...
100 - CLEANING AND MAINTENANCE 914779727/C
slide it out of the seats B at the back.
• When cleaning is complete, repeat the
above procedures to put the rack/tray
support frames back in.
Vapor Clean (on some models only)
Preliminary operations
Before starting the Vapor C lea n function:
• Completely remove all accessories from
inside the oven.
• If present, remove the temperature probe.
• If present, remove the self-cleaning panels.
• Close the door.
• During the assisted cleaning cycle, wash the
self-cleaning panels (where fitted), which
were previously removed, separately in
warm water and a small amount of
detergent.
Vapor Clean cycle setting
1. Touch the OTHER FUNCTIONS
button on the "main menu" (in the main area
).
2. Select VAPOR CLEAN .
3. Touch the START button to start the
reservoir filling procedure.
4. Proceed with reservoir filling as described
above.
Vapor Clean cleaning phase
5. Touch the START button to start the
Vapor Clean function.
This stage is indicated by a progressive increase
in the cooking level.
End of Vapor Clean
At the end of the Vapor Clean function,
"Function ended" displays and a buzzer sounds
briefly, which can be deactivated by touching
any point of the display or by opening the door.
1. Touch the HOME button to quit the
function.
2. Proceed with draining the reservoir as
described above.
3. Open the door and wipe away the less
stubborn dirt with a microfibre cloth.
4. Use a non-scratch sponge with brass
filaments on tougher encrustations.
5. In case of grease residues use specific oven
cleaning products.
6. Remove any remaining water from the oven
cavity.
7. Where fitted, reposition the self-cleaning
panels and the rack/tray support frames.
For greater hygiene and to avoid foods taking
on unpleasant odours:
• We recommend drying the inside of the
oven with a fan assisted function at 160°C
for around 10 minutes.
• Where the self-cleaning panels are fitted,
we recommend drying the inside of the oven
with a simultaneous catalysis cycle.
See General safety instructions.
The Vapor Clean function is an assisted
cleaning procedure which facilitates the
removal of dirt. Thanks to this process, it
is possible to clean the inside of the
oven very easily. The dirt residues are
softened by the heat and water vapour
for easier removal afterwards.
If the internal temperature is higher than
expected, the function is not activated.
Let the appliance cool down before
activating the function.
The duration and temperature of the
Vapor Clean function cannot be
changed by the user.
We recommend wearing rubber gloves
for these operations.
Loading ...
Loading ...
Loading ...