Loading ...
Loading ...
Loading ...
31
en
Problem Cause Solution
Display shows
“12:00”
Power failure or appliance
switched off at power switch�
Re-enter values; do not
switch the appliance off at
the power switch or select
the "Off" option in the Clock
display menu�
Display shows
“Milk container connected?”
despite connected milk
container�
Container is outside the
range of the sensor�
Position the container at the
right edge�
Material e�g� milk carton is
not recognised�
Conrm the display request
with “yes” or use the enclosed
milk container�
Display shows
“Overvoltage or undervoltage”
Voltage too high or too low� Contact electricity or grid
provider� Have the power
supply checked by an expert�
Display shows
“Leave device to cool”
Appliance is too hot� Switch off appliance for
30 minutes�
Display shows, for example:
“Fault: E0510”
The appliance has a fault� Proceed according to the
display screen�
Display shows
“Fill bean container”
although the container is
already full, or the grinder is
not grinding any beans�
Beans are not falling into the
grinding unit (beans too oily)�
Gently tap the bean
container� Possibly change
the type of coffee� When
the bean container is empty,
wipe it with a dry cloth�
Display shows
“Clean brewing unit”
Brewing unit is soiled� Clean the brewing unit�
Too much ground coffee in
the brewing unit�
Clean the brewing unit� Do
not place more than two level
measuring spoons of ground
coffee in the drawer�
The mechanism of the
brewing unit is stiff�
Clean the brewing unit, see
the section “Care and daily
cleaning”�
Display shows
“Refill with still water or
remove filter ”
Water tank wrongly inserted Insert water tank correctly
Carbonated water in the
water tank�
Fill the water tank with fresh
tap water�
Float is stuck in the water
tank�
Remove the tank and clean
thoroughly�
New water lter not rinsed
according to instructions, or
water lter used or defective.
Rinse the water lter
according to the instructions
and then switch on, or use a
new water lter.
Air in the water lter. Dip the water lter into water
until no more air bubbles
escape, replace the lter.
Loading ...
Loading ...
Loading ...