Loading ...
Loading ...
Loading ...
EN 11
EN
Revision 06/2021Copyright © 2021, Fast ČR, a. s.
Device and controls
Check the sensitivity in your application to ensure it does not unnecessarily
mark files as locked even if it only concerns acommon state (bumps on the
road, railway crossings, and similar). The sensor can also be disabled.
• Parking mode – see description further.
Parking mode
A special mode for creating ashort 20s video recording in case your car is hit
while parked in order to capture the offender. This mode activates even when the
camera is turned off. The active parking mode symbolizes the letter “P” at the top
of the screen.
Activating parking mode:
1) Select Off to switch off the parking mode in the device menu.
Potential issues:
a) When the battery power is low, the camera will start, detects the low battery
and switches off again. Maintain the battery charged. If the camera is
connected to apower supply, the recording will not stop after 20 seconds.
b) The camera can start when you enter the car without immediately inserting
the key into the ignition. The key is inserted into the ignition only after 20s
of recording and turning off the camera. The camera will finish the switch off
process and will not restart. Switch the camera on manually.
c) With the ignition on during an active recording process after alonger stop.
This is aconflict between the automatic internal deactivation and automatic
external activation.
Taking photos and setting
When the device is in the Photo mode (icon ),
press OK to take aphoto.
Parameter settings (MENU)
Press MENU once to navigate to mode setup,
twice to access device settings. Press again to
exit both modes back to operating mode. The
OK button is used to confirm options, select UP/
DOWN, confirm again and return by pressing OK.
Loading ...
Loading ...
Loading ...