Loading ...
Loading ...
Loading ...
BEFORE YOU START INSTALLING
Cabinet dimensions/requirements
opening width
"B" opening
._ width
top of
cooktop, see Note.***
Do Not pinch the power
supply cord between
the range and the wall.
Do Not seal the range
to the side cabinets.
Oven side panels must
extend beyond cabinet
fronts by 1/4" where 0"
(flush) of side wall is
desired.
/
Wall receptacle - located in shaded
area - 5" from either cabinet, 11"
max. from floor. Position
receptacle as shown.
Zero sides and back clearances
above and below cooktop
TABLE X
MODEL DIM. "A" DIM. "B" DIM. "C"
20" 20" 20 1/4" 10 1/4"
30" 30" 30 3/16" 20 3/16"
***Note: 24" min. when'bottom of
wood or metal cabinet is protect-
ed by not less than 1/4" flame
retardant millboard covered with
not less than No. 28 MSG sheet
steel, 0.015" stainless steel,
0.024" aluminum or 0.020"
copper.
30" min. clearance between the
top of the cooking platform and
the bottom of an unprotected
wood or metal cabinet.
Anti-tip bracket
The floor-mounted anti-tip bracket MUST be installed.
To install:the anti-tip bracket supplied, see Page 23 and
the anti-tip bracket template/instruction sheet.
-19-
Loading ...
Loading ...
Loading ...