Loading ...
Loading ...
Loading ...
32
SETTING OVEN CONTROLS
To set a self clean cycle:
1. Be sure the oven is empty and all oven racks
are removed. Remove all items from the oven.
Be sure oven door is completely closed.
2. Press Self Clean.
3. A 3-hour clean time will appear in the dis-
play. You may accept the 3-hour clean time or
choose a dierent clean duration by entering
any time between 2 and 4 hours clean time by
entering the time using the numeric keys.
4. Press OK/START twice to activate self clean.
5. The warning to REMOVE RACKS will flash in
the display and beep for 30 seconds to remind
you that oven racks should be removed before
a self clean.
6. The warning will end and Self Clean will start.
The motor door lock will begin locking the oven
door.
Important: Do not open the oven door while the
lock motor is running or when any locking indica-
tors or displays are showing. The oven door is com-
pletely locked in about 15 seconds. Once the oven
door has locked, CLEAN will appear in the display
indicating self clean has started.
Do not force the oven door open when self-clean is
active. This can damage the automatic door-lock-
ing system. Use caution when opening the door
after self-clean cycle is complete; the oven may still
be very hot.
Setting Delay Start Self Clean
To start a delay self clean with default clean time
of 3 hours and a start time of 9:00 o’clock:
1. Be sure the clock is set with the correct time
of day, the oven is empty, and all oven racks
are removed. Be sure oven door is completely
closed.
2. Press Self Clean
3. Press Delay Start.
4. Using numeric keypad, enter 9 0 0.
5. Press OK/START twice to accept.
If it becomes necessary to stop self clean when
active:
• Press OFF.
Important: If self clean has heated the oven to a
high temperature, allow enough time for the oven
to cool. Before restarting self clean, be sure to read
important notes below.
Important notes
• If your clock is set with the (default) 12 hr dis-
play mode, the delay start for a self clean can
only be programmed to start up to 11 hours and
59 minutes after the time showing in the dis-
play (be sure to set the clock to current time
before programming a Delay Start). To set a
Delay Start self clean to begin 12 or more hours
(maximum is 23 hours and 59 minutes) after
the time of setting, be sure to first set the con-
trol in the 24 Hr display mode.
• If self clean was active and then interrupted by
a power failure or cancelled before the oven
was thoroughly cleaned, it may be necessary to
run another self clean cycle.
• If the oven temperature was high enough when
self clean was interrupted the oven control may
not allow another self clean cycle to be set for
up to 4 hours.
When the self clean cycle has completed:
1. CLEAN message will turn o, and Hot will ap-
pear in display window.
2. Once the oven has cooled down (about 1 hour)
and Hot is no longer displayed, the oven door
may be opened.
3. When the oven interior has completely cooled,
wipe away any residue or powdered ash with a
damp cloth or paper towel.
CAUTION
To avoid possible burns, use care when opening
the oven door after the self-cleaning cycle. Stand
to the side of the oven when opening the door to
allow hot steam and air to escape.
Loading ...
Loading ...
Loading ...