Loading ...
Loading ...
Loading ...
30
SETTING OVEN CONTROLS
Restoring Factory Default Settings
Your appliance was set with predetermined (de-
fault) oven control settings. Over time, users may
have made changes to these settings. The follow-
ing options may have been modified since the
appliance was new:
• 12 or 24 hr display mode
• All Meat Probe settings
• Continuous bake or 12-hour energy savings
mode
• Silent or audible control
• Oven temperature display (Fahrenheit or Cel-
sius)
• Oven temperature adjustments (UPO)
To restore oven control to factory default settings:
1. Press and hold 7 on numeric keypad until ac-
ceptance tone sounds (about 6 seconds).
2. Press OK/START. The control has been reset
with the default settings.
Adjusting the oven temperature
Your appliance has been factory calibrated and
tested to ensure an accurate baking temperature.
For the first few uses, follow your recipe times and
temperature recommendations carefully. If you
think the oven is cooking too hot or too cool for
your recipe times, you can adjust the control so the
oven cooks hotter or cooler than the temperature
displayed.
Important: Do not use oven thermometers such as
those found in grocery stores to check the tem-
perature settings inside your oven. These oven
thermometers may vary as much as 20 to 40 de-
grees from actual temperatures.
The oven temperature may be increased as much
as +35°F (+19°C) or decreased -35°F (-19°C) from
the factory calibrated settings.
To increase or decrease the oven temperature by
20°F:
1. Press and hold Bake until the control produces
an audible tone (about 6 seconds). The factory
oset temperature of 0 (zero) should appear in
the display.
2. Enter 2 0 using numeric keypad.
3. To oset the oven by -20°F, press self clean to
toggle between + and -.
4. Press OK/START to accept change.
Important note:
• Oven temperature adjustments will not change
the Broil, Self Clean, or Keep Warm tempera-
tures.
• The oven temperature adjustment may be
made if your oven control is set to display
temperatures in °C (Celsius). Minimum and
maximum settings for Celsius range from plus
(+)19°C to minus (-) 19°C.
CAUTION
ALL of the above user settings will be restored to
the factory default settings.
Loading ...
Loading ...
Loading ...