Loading ...
Loading ...
Loading ...
ASSEMBLY
IMPORTANT: Readentire owner's manualbefore you
attempt to assembleor operate your new pressure washer.
Remove Pressure Washer from
Carton
• Removethe parts bag packedwith pressure washer.
• Slicetwo corners at the end of carton from top to
bottom so the panel can be folded down fiat, then
remove all packing material.
• Roll pressure washer out of carton.
Carton Contents
Items in the carton include:
• Main Unit
SafetyGoggles
Handle
PlasticAccessory Tray
High Pressure Hose
SprayGun
Nozzle Extension with Quick Connect Fitting
Oil Bottle
Parts Bag(which includesthe following):
Owner's Manual
EngineManual
EngineWarranty Card
EmissionsControl Warranty Card
Owner's Registration Card
Bagcontaining4 mult_olored Quick Connect Nozzles
MaintenanceKit
Handle FasteningHardware Kit (which includes):
Carriage Bolt
"L" Bolt
PlasticKnobs (2)
"J" Hook
Chemical Hose Clip
SelfTappingScrews(5)
PREPARING PRESSURE
WASHER FOR USE
If you haveanyproblems with the assemblyof your
pressure washer or if parts are missingor damaged,call the
pressure washer helpline at 1-888-611-6708.
To prepare your pressure washer for operation, you
will need to perform these tasks:
I. Fill out and sendin registration card.
2. Attach accessorytray to handle, then attach handle to
main unit.
3. Add oil to engine crankcase.
4. Add fuel to fuel tank.
5. Connect high pressure hoseto spraygun and pump.
6. Connect water supply to pump.
7. Attach nozzle extension to spray gun.
8. Select/attach quick connect spray tip to nozzle
extension.
Attach Handle and Accessory Tray
NOTE: All assemblyoperations given in this section will
be described from the perspective of assemblingthe
pressure washer from the rear.
I. Slide plastic accessorytray onto handle and align holes
in accessorytray with holes on handle (Figure I).
Loading ...
Loading ...
Loading ...