Loading ...
Loading ...
Loading ...
Section 4: Operation
How to Use Accessory Tray
The unit isequipped with an accessorytray with placesto
store your nozzle extension and slots to hold the cleaning
solution bottle and the detergent siphoning filter. There are
also two hooks at the endsof the handle to hold your
spray gun and high pressure hose.
NOTE: The extra holes in the tray are for storing a brush
and a turbo wand. The brush and turbo wand are NOT
includedwith your pressure washer.You can buy these
itemsasoptional accessories.
I. Placenozzleextension through hole on accessorytray,
as shown in Figure 14.
2. Hangyour chemical solution bottle on "J"hook and
place detergent siphoning filter in last slot on left
(Figure 14).
3. Placespray gun on hook attached to accessory tray on
right side of unit (Figure 14).
4. Hanghigh pressure hose on hook attached to
accessory tray on left side of unit.
How to Use Spray Tips
The quick-connect on the nozzleextension allows you to
switch between four different quick connect spray tips.The
spray tips varythe spray pattern asshown (Figure 15).
CAUTION
Low Pressure
Black
Use to apply
chemical
High Pressure
40° White 15° Yellow 0° Red
Follow these instructions to change spray tips:
I. Engagesafety latchon spray gun.
2. Pullback collar on quick-connect and pull current
spray tip off. Store spray tips n slots on holder that's
attached to nozzle extension.
3. Select desired spray tip:
For gentle rinse, select white 40° spray tip.
To scour surface, select yellow 15° or red 0° spray
tip.
To applychemical, select black spraytip.
4. Pull back on collar, insertnew spray tip and release
collar. Tugon spray tip to make sure it issecurely in
place.
5. For most effective cleaning,keep spray tip from 8 to
24 inchesawayfrom cleaningsurface. If you get spray
tip too close,you may damagecleaningsurface.DO
NOT get closer than 6 incheswhen cleaningtires.
NEVERexchangespraytips without locking the safetylatch
on the trigger.
m
Loading ...
Loading ...
Loading ...