Troy-Bilt 01903 Troybilt Pressure Washer

Owner's Manual - Page 4

For 01903.

PDF File Manual, 36 pages, Read Online | Download pdf file

01903 photo
Loading ...
Loading ...
Loading ...
Section 1: Safety Rules
WARNING
DO NOT touch hot surfaces.
Stay dear of exhaust gases.
Allow equipment to cool before touching.
WARNING
DO NOT wear loose clothing, jewelry or anything that may
be caught in the starter or other rotating parts.
Tie up long hair and remove jewelry.
WARNING
Always wear eye protection when using this equipment or in
vicinity of where equipment is in use.
WARNING
Disconnect spark plug wire from spark plug and place wire
where it cannot contact spark plug.
CAUTION
DO NOT tamper with governed speed.
DO NOT operate pressure washer above rated pressure.
CAUTION
DO NOT secure spraygun in open position.
DO NOT leavespray gun unattended while machine is
running.
NEVER use aspraygun which does not havea trigger lock or
trigger guard in placeand in working order.
Always be certain spraygun, nozzles andaccessories are
correctly attached.
CAUTION
DO NOT point spraygun at glasswhen in jet spray mode.
NEVER aim spray gunat plants.
CAUTION
tf you have questions about intended use, askdealer or
contact Briggs& Stratton Power Products.
NEVER operate units with broken or missing parts, or
without protective housing or covers.
DO NOT by-pass any safetydevice on this machine.
Before starting pressure washer in cold weather, check all
parts of the equipment to be sure ice has not formed there.
NEVER move machine by pulling on high pressure hose. Use
handle provided on unit.
Check fuel system for leaksor signsof deterioration, such as
chafed or spongy hose, loose or missingdamps, or damaged
tank or cap.Correct all defects before operating pressure
washe_
This equipment is designedto be used with Briggs& Stratton
Power Products authorized parts ONLY. Ifequipment isused
with parts that DO NOT comply with minimum specifications,
user assumesall risks and liabilities.
Loading ...
Loading ...
Loading ...