Loading ...
Loading ...
Loading ...
46 47
Cleaning your low profile agitator
If your low profile agitator becomes stained we recommend you use household bleach to clean
it. Ensure you wear gloves, tip a small amount of household bleach onto a soft cloth and apply
to the stain. Be careful to avoid metal surfaces of your machine. Leave it to soak in for 10 minutes
and repeat. Then put your AquaSmart™ washer through the CLEAN ME cycle to remove any
residual bleach (refer to page 46).
Automatic lint disposal system
With AquaSmart™ there is no need to remove messy lint filters. Your AquaSmart™ has a self
cleaning lint disposal system. It automatically separates the lint from the wash water as it
washes. The lint becomes trapped between the inner and outer bowls and is flushed out at the
end of the wash.
Nappy sanitisers/bleach
Nappy sanitisers and bleach are very corrosive to metal surfaces. DO NOT use your AquaSmart™ to
soak items in bleach or sanitiser, or tip the contents of the nappy bucket into your machine. Rinse
and wring items out thoroughly before placing them in the machine.
For LCD model users, wring out cloth nappies before using the NAPPY RINSE cycle in LIFESTYLE
cycles, FAMILY (refer to page 30).
For LED model users, wring out cloth nappies, place into the washer and select BULKY cycle.
Using the ADVANCE button, advance the cycle to RINSE and press START. After the cycle is
complete, wash nappies as normal.
Caring for your AquaSmart™ washer
When you have finished the cycle
Turn off the taps to prevent the chance of flooding should a
hose burst.
Unplug the machine from the wall socket.
Cleaning your AquaSmart™
Before you start cleaning your AquaSmart™ washer, ensure that
it is turned off at the wall (or that the Key Lock mode has been
activated (LCD models only, refer to page 34)).
Cleaning the soft touch buttons, screen and topdeck
Use a soft damp cloth to wipe all surfaces, and wipe dry. Avoid
using chemical or scouring cleaners, as these will damage the
paint and plastic surfaces of your washer.
You can also remove the lid for cleaning. Open the lid fully,
grasp the lid on both sides. Lift in an upward motion, as shown.
To replace the lid, hold the lid vertically and align both hinges
before pushing downwards and slotting back into place.
Cleaning the detergent and fabric softener dispensers
Wipe out the detergent dispenser with a damp cloth. The funnel
of the fabric softener dispenser (the top) clicks off easily. Simply
place a finger down the centre and lift. The fabric softener well
is not removable and needs to be wiped clean periodically. If the
siphon tube looks partially blocked use a cotton bud to clean.
Cleaning the inside of your washer
It is important that you occasionally clean the inside of your
machine. Your AquaSmart™ has a bowl clean cycle specifically for
this purpose. We recommend that you use the CLEAN ME cycle 5
– 6 times a year and suggest that you do not wash clothes during
this cycle. (Note: LCD models will show a reminder on screen to
do this after every 100 cycles).
LCD model: Cleaning steps
LED model: Cleaning steps
1
Add approximately 2 scoops of a powdered
detergent that contains phosphate directly
into the detergent dispenser.
1
Add approximately 2 scoops of a powdered
detergent that contains phosphate directly
into the detergent dispenser.
2
Turn your machine on and scroll to
LIFESTYLE cycles.
2
Turn your machine on and press and hold
the HIGH EFFICIENCY and START buttons.
3
Scroll to the CLEAN UP screen.
4
Select CLEAN ME.
3
Your AquaSmart will automatically start the
CLEAN ME cycle.
Fig.22 Removing the lid
Fig.23 Removing the
fabric softener funnel
Caring for your AquaSmart™ washer
Loading ...
Loading ...
Loading ...