Loading ...
Loading ...
Loading ...
40 41
Option Adjustment mode
After using your AquaSmart™ you may want to fine tune some of the options to suit your
wash needs.
There are a number of preset options, which can be altered.
The wash temperatures.
The rinse option.
Changing the cold wash to Controlled Cold.
The number of beeps at the end of the cycle.
The Out of Balance recovery routine.
Resetting the washer back to the settings it left the factory with.
To enter Option Adjustment mode
1
Turn the washer on at the wall but do not press POWER.
Press START/PAUSE and hold down, then press POWER.
You will hear two quick beeps and the machine will show an
unusual pattern of lights. Pages 42-45 explain the different
options in more detail.
2
Use the buttons on the panel to make your changes to the
pre-set options.
3
Press POWER to return to normal mode.
4
Your AquaSmart™ will automatically remember your changes.
Fig.16 Press START/PAUSE and
hold down, then press POWER
Changing pre-set options
To customise a cycle
You can program your AquaSmart™ to remember the wash options you prefer for each wash
cycle. For instance, you may want to set the REGULAR cycle to a cold wash.
1
Press POWER.
2
Press the wash cycle button.
3
Select your wash options, (eg. cold wash).
4
Press and hold down the wash cycle button for 2 seconds, until you hear a beep. This will store
your customised cycle for future washes.
To change your customised wash cycle simply repeat these steps.
Note: You will be unable to customise a wash cycle to start at the rinse or spin stage.
Fig.15 Customising the wash cycle
Customising the wash cycles
Loading ...
Loading ...
Loading ...