Loading ...
Loading ...
Loading ...
32. Route power cord.
If using a power cord, make sure to route end through hole in
cutout before sliding dishwasher into cabinet opening.
33. Secure installation blanket
A
B
A. Insulation blanket
B. Secure blanket
NOTE: Make sure insulation blanket is secured at both left
and right rear corners before pushing into cabinet opening to
keep the blanket from bunching up in a tight-fitting cabinet.
34. Move dishwasher all but 6" (152 mm) into
cabinet opening
NOTE: Leave unit about 6" (152 mm) out from cabinet in
order to install anchor brackets and adjust door tension if
needed.
35. Pull slack from utilities
NOTE: Pull slack out of utilities at the same time the
dishwasher is pushed into the cabinet opening to avoid any
kinks.
Choose Anchor Attachment Method
IMPORTANT: The dishwasher must be secured to the cabinet as
one of the final steps. Prepare the dishwasher for this by attaching
the 2 brackets found in the parts bag to the dishwasher.
– For countertops that are wood, laminate, or another similar
surface, use Countertop Attachment: go to step 36
– For countertops that are marble, granite, or another hard
surface, use Side Attachment: go to step 37
NOTE: If the gap between the top of the door and the underside of
the countertop is tight (less than 1/4" [6.35 mm]), we suggest
using Side Attachment to keep from scratching the User Interface
or console with the anchor screws.
Countertop Attachment:
36. Insert bracket
NOTE: Tabs must point to the right.
Remove the brackets from the package and insert into the
open slots on the left- and right-hand top of the dishwasher
collar as shown. Go to step 41.
Bend tab
Using pliers, bend/twist tab to lock the brackets in place.
6"
(152 mm)
17
Loading ...
Loading ...
Loading ...