Loading ...
Loading ...
Loading ...
Fault Diagnosis
Start
Part Name
Check and record the error code
according to the failure table
If "E01" code is shown
If "E04" code is
shown
If "E02" code is shown
Ensure that the water source is
connected and the water pressure
is table, press the power key to
eliminate the noise, and press the
key " " to continue washing
Roof lifting motor
failuer
Check or replace the
motor
The current program is
cancelled,
and a failure warning is
given. The
machine will be tested
again after
it restarts. If normal, the
machine
can operate normally; if
Press the key " " to eliminate the
beeping sound
If "E05" code is shown
If "E l0" code is
shown
If "E06" code is shown
The current program is cancelled,
and a failure warning is given. The
Machine cannot start any washing
program.the system can become normal
only after the on-line test program is applied
again and the test results are acceptable.
Overflow warning the system enters the
failure mode, and the water drain pump
starts.
Replace the electric control panel and
the motor heat pump,
Check if X3 wiring is connected
reversely or is in open circuit.
Display
Touch Button
Handle
Glass Panel
Indicator icon
38 7
Loading ...
Loading ...
Loading ...