Loading ...
Loading ...
Loading ...
If the washing block is used, the manufacturer's suggestions on the packing bag shall be
observed. Some washing blocks may not be applicable to all the washing programs.
The use of washing block in the region with hard water can improve the washing effect.
Ensure that the washing block does not contact the dishes, knives or forks directly.
If the used washing block contains any rinse aid, you are suggested to lower or disable
the function of rinse aid. Please read the introductions in "Quick Guidance" for details.
Important note!
Washing agents of dishwasher are strongly basic. The unexpected swallowing of washing
agent may be very hazardous. Skins and eyes shall be protected from washing agent.
When the dishwasher is opened, the children and the weaker people must be far away
from the dishwasher. After washing, it is required to check if the washing agent feeder
box is drained completely.
In order to improve the drying effect of dishes, the use of rinse aid is suggested.
The rinse aid can remove the water stains on the glassware and chinaware, and prevent
the metallic products from loss of gloss.
The rinse aid feeder is located inside the drawer and under the washing agent feeder.
About 50mI rinse aid can be added into the rinse aid feeder.
It is normal to hear the abnormal sound when the rinse aid feeder is operating.
When to add the rinse aid
If the lack of rinse aid is detected, the above sign will be shown after the machine starts.
The sign will flash for three times every minute, to warn the user of adding the rinse aid.
If the rinse aid indicator lamp does not go on, it is unnecessary to add the rinse aid, and
the existing rinse aid is enough for the washing program.
Notice: Compared with the rinse aid with darker color, the dimming level of indicator lamp is
less if the rinse aid with lighter color is used.
Touch Instructions
Lid motor operation
1. When press the "stop/start" button to boot, the top motor will drive the top drawer downward
seal, and then the program will start.
2. The program is running mode, press the "stop/start" button to suspend the program runs.Within
the prescribed period of time, the top motor drivel-Jpward, completely release the machine head, a
buzzer two sounds to inform lid seal has been released.
3. After the start the program or in the process of the program is running, not to pull out the drawer,
have to press the "stop/start" button,
Such as roof upward in place after the buzzer two to pull out the drawer.
Time Delay
By pushing ( )with”OFF”seleection,the time delay is cancelled and program
Selection mode.is set back.
By pushing ( ) with any other selection, the time delay is set and Time delay starts counting
down every minute.
During Time Delay Counting mode, after the time delay is exhausted the washing
program is started in the standard operation way (see Program running mode).
Note: Once Time Delay mode is set, the door must be sealed through the Lid motors.
So,
If the user needs to access the basket, this mode must be cancelled first.
Settings
• Settings can be configured by using a button combination during Start or Program Selection mode.
28 17
It is possible to activate a time delay for the washing program to start.
The time delay can be activated by pushing ( ) + ( ) keys for 3 seconds during
Program Selection mode.
During Time Delay Selection mode, time delay changes in I hour steps (counting up)
by pressing ( ). The time delay at a maximum can be 9 hours: "+ 9".
The complete sequence while pressing ( ) is:
•• B
I
B
f
y
y
(
pushin
)
g
s
( ) +
it
(
w
s
ith
)
it
(
"
c
f
b
o
h
a
r
e
c
2
s
k"
b
se
s
e
c
e
t
o
l
w
e
n
c
e
d
t
e
s
io
)
n
,
n
t
,
s
h
e
it
e
t
r
t
s
e
i
e
n
t
t
u
g
t
r
i
s
n
n
.
gs menu is entered.
Use instructions of washing block
s back to Program S
election mode.
w
i
ng
press
pressed
i
Loading ...
Loading ...
Loading ...