Loading ...
Loading ...
Loading ...
• By pressing ( ) while any setting is selected, the corresponding setting submenu is entered in
order to change the preferences.
The following table shows visualization for each setting:
Childlock function
There are two ways of managing Childlock:
1、Childlock can be automatically activated for every start after selecting a program and pressing
( ) if "Permanent activation of Childlock at start' is configured as "ON" as a preference in
settings menu.
2、Otherwise, to activate childlock mode: press ( ) for 3 seconds during Program Running mode.
If the activation is successful, the 7-segment shows:
While Childlock is activated all other touch area functions are disabled and remains ON.
By touching any button, the Childlock activated screen is shown for 2 sec (see above table).
To unlock / deactivate Childlock, ( ) has to be pressed again for 3 seconds. When
deactivation was successful, the indicator symbol is not lighted any more and all other
The following washing agents are inapplicable to the dishwasher, and may damage
the dishwasher and result in loss of warranty.
Important note!
The following washing agents must not be used in the dishwasher:
Washing fluid
Laundry soap powder
Liquid soap
Soap
Sanitizer
For the dish washing powder, please refer to the last section "Introduction to Washing
Program", and add the dish washing powder according to the local water hardness.
A suitable amount of washing agent shall be filled according to the adding mark. Other
washing agents shall be added according to the manufacturer's suggestions.
full (40. 5g)
1/3 (27g)
1/3 (13. 5g)
18 27
Inapplicable washing agent
Softener and finishing in Back. The following table shows the different submenu
selections for each setting:
Dosage of washing agent
By pushing ( ) the level or preference changes (switching) starting from Water
Set t ings
Loading ...
Loading ...
Loading ...