Loading ...
Loading ...
Loading ...
Installation Guide lines
Water inlet connection to dishwasher:
Connection method of drain pipe:
The outlet end of the drain pipe can be inserted into the upright sewer,Or connect to the turning
joint of the sink sink. The drainage pipe must be fastened with a clamp and the screws must be
tightened.
When connecting the drain pipe, pay attention that the highest part of the drain pipe cannot
exceed the highest height of the dishwasher.
In order to prevent the backflow of sewage, the outlet of the drainage pipe cannot be immersed
in water, and the drainage pipe is not bent and concaved.
It is best to install the dishwasher near the drain pipe. The length of the dishwasher drain pipe is
about 1.5 meters. If it is far away, users need to purchase adapters and drain pipes by themselves,
but the total length should not exceed 4 meters, otherwise it will affect washing.
The drain nozzle must not be immersed in water.
Cleaning of spray arm
1. Power off the dishwasher, or unplug the power wire plug.
2. Lift up the glass cup bracket from the bracket iron wires (if the bracket is folded), lift up all the
tea cup trays, and ensure that they are vertical and close to the drawer top.
3. Remove the dish rack carefully: lift up the rear part of lower rack, and during this course,
notice to prevent the front end of rack from colliding with the feeder box or rinse aid box.
4. Take out the spray arm, and remove all the residues in the spray arm.
Wash the spray arm With clean water, and then wipe it dry with wet cloth.
5. Insert the spray arm onto the support.
6. Properly install the lower dish rack, and notice to first install the front end of lower dish rack
in place.
7. Push in the drawer, and power on the dishwasher.
Notice: The broken glass or tea cup debris in the drawer must be removed completely and
carefully for fear of damaging the dishwasher
Spray
12 33
Loading ...
Loading ...
Loading ...