Loading ...
Loading ...
Loading ...
3
Code and local codes and ordinances is required.
Do not kink or pinch the power supply cord between the ice maker and cabinet.
The circuit breaker rating should be 15 amperes.
It is important for the ice maker to be leveled in order to work properly. You may
need to make several adjustments to level it.
All installations must be in accordance with local plumbing code requirements.
Make certain that the pipes are not pinched or kinked or damaged during
installation.
Check for leaks after water line and drain line connection.
Never allow children to operate, play with or crawl inside the ice maker.
Although the unit has been tested at the factory, due to long-term transit and
storage, the first batch of cubes must be discarded.
Never turn the water supply tap off when the ice maker is working.
If the ice maker will not be used for a long time, before the next use it must be
thoroughly cleaned. Carefully follow instructions as provided for cleaning or use
of sanitizing solution. Do not leave any solution inside the ice maker after
cleaning.
DO NOT touch the condenser fins. The condenser fins are sharp and can be easily
damaged.
DO NOT use solvent-based cleaning agents or abrasives on the interior. These
cleaners may transmit taste to the ice cubes, or damage or discolor the interior.
The ice machine cleaner contains acids. DO NOT use or mix with any other
solvent-based cleaner products. Use rubber gloves to protect hands and protective
eye wear. Carefully read the material safety instructions on the container of the
ice machine cleaner.
Do not use this apparatus for anything other than its intended purpose.
SAVE THESE INSTRUCTIONS
Electrical Connection
Do not, under any circumstances, cut or remove the third (ground) prong from the
power cord. For personal safety, this appliance must be properly grounded. The
power cord of this appliance is equipped with a 3-prong (NEMA 5-15P) grounding
plug that mates with a standard 3-prong (NEMA 5-15R) grounded wall receptical to
minimize the possibility of electric shock hazard from the appliance. Have the wall
receptical and circuit checked by a qualified electrician to make sure the it is
properly grounded. When a old style 2-prong wall receptical is encountered, it is
your responsibility and obligation to have it replaced with a properly grounded
3-prong receptical. The ice maker should always be plugged into its dedicated
outlet which has a voltage rating that matches the rating label on the appliance. This
provides the best performance and also prevents overloading wiring circuits which
can be a fire hazard from overheated wires. Never unplug your ice maker by pulling
on the power cord. Always grip the plug firmly and pull straight out from the
Loading ...
Loading ...
Loading ...