Loading ...
Loading ...
Loading ...
24
10. Reassembly the sprinkler arm, slideway and the flake covers.
11. After the Icemaker System Cleaning procedure below.
Ice Making System Cleaning
Minerals that are removed from water during the freezing cycle will eventually
form a hard scaly deposit in the water system. Cleaning the system regularly helps
remove the mineral scale buildup. How often you need to clean the system
depends upon how hard your water is. With hard water of 15 to 20 grains/gal. (4
to 5 grains/liter), you may need to clean the system as often as every 3 to 6
months.
It is the USER’S RESPONSIBILITY to see that the unit is properly maintained. It is
always preferable and less costly in the long run, to avoid possible down time by
keeping it clean and adjusted as needed; and by replacing worn components before
they can cause failure. The following is a list of recommended maintenance that will help
keep the machine running with a minimum of problems.
Maintenance and Cleaning should be scheduled at a minimum of twice per year.
Note: Electrical power will be ON when performing the following cleaning instructions.
1. Remove ice machine front panel.
2. Make sure all ice is off evaporator. If ice is being made, initiate harvest or wait
for cycle completion, then turn machine off at the power switch.
3. Remove all ice cubes from the storage bin.
4. Keep the ice maker connected to the water supply. Pour 8 oz. of Nickel-Safe
Ice Maker Cleaner Solution into the water tank.
5. Turn on the power switch.
Within 3 minutes press the Clean button. The
machine will go into the cleaning mode automatically.
Loading ...
Loading ...
Loading ...