Loading ...
Loading ...
Loading ...
15
drain connections and the nut of the drain water hole. Tighten any connections
or fittings that leak.
5. If electrical outlet for the ice maker is behind the cabinet, plug in the ice
maker.
6. Push the ice maker into position.
7. Pour 1 gallon (3.79L) of water to the ice storage bin to check if the drainpipe
is kinked or pinched.
8. Seal all around the cabinet to the floor with an approved caulking compound.
OPERATION
Final Check List before Operation
1. Have all packing materials and tape been removed from the interior and
exterior of the ice maker?
2. Did you clean the ice storage bin?
3. Have the installation instructions been followed, including connecting the
machine to water, drain and electricity?
4. Has the machine been leveled? Feet locked?
5. Is the ice maker in a site where the ambient temperature is between 55°F
(13°C) and 90°F (32°C) and the water temperature within 41°F (5°C) and
77°F (25°C) all year round?
6. Has the water supply pressure been checked to ensure a minimum of 14.5psi
and 72.5psi (0.1 MPa and 0.5 MPa)?
7. Is there at least a clearance of 4” (101mm) at the rear, and 0.6” (15mm) at the
sides and top for proper air circulation?
8. Has the power supply voltage been checked or tested against the data label
rating? And has proper grounding been installed in the ice maker?
9. Is the ice maker plugged in?
10. Did you turn on the main water supply and tap?
11. Did you check leaks to all water supplies and drainpipe connections?
Loading ...
Loading ...
Loading ...