Loading ...
Loading ...
Loading ...
These inslructions assume that you have already conneclcd your TV to an antenna or a cable TV syslcm (according to the inslructions on
pages 7-8). Skip slop 1 if you have not yet connected to an anlenna or a cable syslcm.
t.
z
3.
IV Rear Panel
5.
Follow the instructions in "Viewing a VCR or Camcorder Tape" to view your VCR tape.
Each external input source device has a different back panel configuration.
:_ When connecting an external device, match the color of the connection terminal to the cable.
Unplug the cable or antenna
from the back of the TV.
Connect the cable or antenna
to the ANT IN terminal on the
back of the VCR.
Connect an RF Cable
between the ANT OUT
terminal on the VCR and the
ANT 1 IN (AIR) orANT 2 IN
(CABLE) terminal on the TV.
Connect a Video Cable
between the VIDEO OUT jack
on the VCR and theAV IN 1
[VIDEO] jack on the TV.
Connect Audio Cables
between the AUDIO OUT
jacks on the VCR and the
AV IN t [R-AUDIO-L] jacks
on the TV.
If you havea "mono"
(non-stereo)VCR, usea
Y-connector(not supplied)to
hookup to the right and left
audio inputjacks of the TV.
If your VCR is stereo, you
mustconnecttwo cables.
Connecting an S-VHS VCR
Your Samsung TV can be connecled to an S-Video signal from an S-VHS VCR.
This connection delivers a bener picture as compared to a standard VHS VCR.)
TV Rear Panel
VCR Rear Panel
An S-Video cable is usually included with an S-VHS VCR. (If not, check your local electronics store.)
:_ Each external input source device has a different back panel configuration.
:_ When connecting an external device, match the color of the connection terminal to the cable.
1. To begin, follow steps I-3
in the previous section to
connect the antenna or
cable to your VCR and
your TV.
2. Connect an S-Video Cable
between the S-VIDEO OUT
jack on the VCR and the
AV IN1 [S-VIDEO] jack on
the TV.
3. ConnectAudio Cables
between the AUDIO OUT
jacks on the VCR and the
AV IN1 [R-AUDIO-L] jacks
on the TV.
English-9
Loading ...
Loading ...
Loading ...