Loading ...
Loading ...
Loading ...
25
WW_EN
Printable image
format
JPEG images taken with this unit
Print output time Approximately 16 seconds
* Plus 7 seconds when printed using
instax-Rich Mode immediately after
startup.
Print function Images in the internal memory and
images in the memory card can be
printed
Reprint Reprint is possible for images stored in
print history (up to 50)
■ Other
Smartphone app
linked functions
Smartphone image print function,
remote shooting function, printed image
transfer function, firmware upgrade
function
LCD screen 3.0-inch TFT color LCD screen
Pixel count: Approximately 460,000 dots
External interface Micro USB Micro-B (for charging only)
Power supply Lithium ion battery (internal type: not
removable)
Charging function Built-in
Possible number of
printed images
Approximately 100 (from full charge)
* The number of prints depends on the
usage conditions.
Charging time Approximately 2 to 3 hours
* Charging time depends on the
temperature.
Main unit
dimensions
87 mm × 122.9 mm × 36 mm (excluding
projecting parts)
Main unit weight Approximately 285 g
Operating
environment
Temperature: 5°C to 40°C
Humidity: 20% to 80% (no condensation)
Film used FUJIFILM instant film “instax mini” (sold
separately)
* The above specifications are subject to change for better
performance.
Troubleshooting
Please check the following items before considering a problem to
be a malfunction. If the problem persists even after taking action,
please contact our service center for repair or visit the website
below.
FUJIFILM website: https://www.fujifilm.com/
If the following problem occurs���
Problem Possible causes and solutions
I cannot turn on
the camera.
The battery may be exhausted. Please
charge the camera.
The battery is
exhausted
quickly.
If you use the camera in a very cold
environment, the battery will drain quickly.
Please keep the camera warm before
shooting.
Camera shuts
down during
use.
The battery level may be low. Please charge
the camera.
Charging does
not start.
•Make sure that the USB power adapter
plug is properly connected to the power
outlet.
•Turn off the camera when charging it. If
power is on camera will not charge.
It takes too long
to charge.
At low temperatures, charging may take
some time.
The self-timer
lamp flashes
while charging.
Charge the battery in a temperature range of
+5 °C to +40 °C. If you cannot charge the
battery within this range, please contact our
support center.
I cannot shoot
when I press the
shutter button.
•Make sure that the power is on.
•If the battery level is low, please charge
the camera.
•If the internal memory or memory card is
full, insert a new memory card or delete
unnecessary images.
•Use a memory card formatted with this
unit.
•If the contact surface of the memory card
(gold part) is dirty, wipe it with a soft, dry
cloth.
•The memory card may be broken. Please
insert a new memory card.
I cannot focus
the camera.
Use the AF/AE lock to shoot subjects that are
difficult to focus on.
The flash does
not fire.
Check that the suppressed flash setting has
not been selected. Select a setting other
than the suppressed flash setting.
Even though the
flash fired, the
image is dark.
•Check that you are not too far from the
subject. Please shoot within the flash
range. Approximately 50 cm to 1.5 m.
•Hold the camera correctly so that you do
not obstruct the flash with your fingers.
Loading ...
Loading ...
Loading ...