Loading ...
Loading ...
Loading ...
SelfoC/eaningCycle
CARE NIN6
tto Remove the broiler pan and grid,
oven racks, utensils and any foil
that may be in the oven.
2, Soil on the front frame, I" inside
the oven, and outside the door
gasket will need to be cleaned
by hand.
Front Frame
Door Liner
Clean these areas with hot water,
soap-filled steel wool pads or
cleansers such as Soft Scrub@ to
remove any soil. Rinse well with clean
water and dry.
3, Wipe up any heavy spillovers on
the oven bottom.
4, Do not clean the door gasket. The
fiberglass material of the oven
door gasket cannot withstand
abrasion. It is essential for the
gasket to remain intact. If you
notice it becoming worn, frayed or
displaced on the door, it should be
replaced.
The door gasket is designed to have
a 5-6" gap at the bottom of the door.
This allows for proper air circulation.
Door Panel Gasket
It is normal for your oven door to give
the appearance of not having a good
seal against the range. This is due to
the gasket. The location of the gasket
on the oven door maintains a good
seal and prevents any heat loss.
_ ten.sills should never
be teft Jr, the oven"
during a se_f=clean
cycl]e=
The oven racks may be
cleaned during the self.
cllean, cyclle, but wiJl lose
their luster and become hard
to slide, nf you choose to
leave Utem 5n.during the
cyclte, wiping them down
with vegetabae oil after the
cycle will! help them sHide
eas_er,
For the first clean cycle,
vent the room with an
opened window or hood
vent, Th_s wHl_ a'educe the
odor produced when heating
new parts,
17
Loading ...
Loading ...
Loading ...