Loading ...
Loading ...
Loading ...
11
NOTE:
Removing the doors is always recommended when it is necessary to move the refrigerator through a narrow opening.
If it is necessary to remove the handles, follow the directions below.
HOW TO REMOVE FREEZER
DRAWER HANDLES
NOTE:
Handle appearance may vary from the illustrations
on this page
.
Use the provided 2.5 mm hex key to loosen the set
screw located on the inside ends of the handle. Then
pull the handle sideways.
Remove the handle from the underlying handle
mounting bolts on the door
.
HOW TO REPLACE FREEZER
DRAWER HANDLES
NOTE:
Handle appearance may vary from the illustrations
on this page.
Hang the handle of one side on the mounting bolt and
push as shown. Use the 2.5 mm hex key to tighten the
set screw to secure the handle in place.
A
WARNING
When assembling or disassembling the handles:
•
Grasp the handle firmly to ensure it will not drop or cause
injury.
•
Prevent the handle from swinging toward nearby people or
animals
.
•
Insert the handle footprints over the door mounting
fasteners and tighten the hex screws to fix the handle in
place.
•
Check for any gap between the door and handle after the
handle is fixed in place.
Loading ...
Loading ...
Loading ...