Loading ...
Loading ...
Loading ...
9
Black (hot/power)
White (neutral)
Bare/Green
(ground)
Red
White
White
White
Black
Blue
Blue
Black
Green
Green
Receiver
1. Wire the fan.
Connect household supply and fan wires according to the diagram and these steps:
• Connect the white wire with the red label from the receiver to the white (neutral/common)
supply wire.
• Connect the red wire with the red label from the receiver to the black (hot/power) supply wire.
• Connect the green wire from the fan and the mounting bracket to the bare/green (ground)
supply wire.
• Connect the black wire from the receiver to the black fan wire.
• Connect the white wire from the receiver to the white fan wire.
• Connect the blue wire from the receiver to the blue fan wire.
Important: After the connections have been made, the wires should be turned upward and
pushed carefully up into the outlet box. Place the black and white wire connections on opposite
sides of the outlet box.
2. Attach the canopy to the
mounting bracket.
Align the canopy over the loosened
mounting bracket scews preassembled to
the mounting bracket. Place the J-slot of the
canopy onto the mounting bracket screws
and rotate clockwise.
Re-install the two previously removed
mounting bracket screws into the round
holes of the canopy and tighten all four
mounting bracket screws.
FINAL INSTALLATION
x 6 x 4
Mounting
Bracket
Screw
If the household supply wires are dierent colors than those referred to
above, a professional electrician should determine proper wiring.
Canopy
J-slot
Loading ...
Loading ...
Loading ...