Loading ...
Loading ...
Loading ...
10
3. Attach blades to motor.
Insert blade through slot in the side of
the motor assembly. Align the holes of
one blade with three blade screw holes in
underside of the motor assembly. Secure
with three blade screws and blade washers.
Repeat this step for the remaining blades.
4. Connect light kit wires.
Remove one of the three tter plate screws
preassembled to the tter plate and loosen
the other two but do not remove.
Connect the single-pin connector from the
tter plate to the single-pin connector from
the light kit -- blue to black and white to
white. Align the slotted holes in the light
kit with the loosened screws in the tter
plate. Turn light kit clockwise and replace
the previously removed tter plate screw.
Tighten all screws.
FINAL INSTALLATION
x 9
x 3
Slot
Blade Screw
Blade Washer
Fitter Plate
Screw
Light Kit
Single-pin
Connector
Fitter Plate
5. Install the two E26-base LED
bulbs.
Replacement Bulbs - Use E26-base LED,
CFL, or incandescent bulbs (60 watts max.).
Halogen bulbs are not recommended for this
item.
Bulb
Loading ...
Loading ...
Loading ...