Loading ...
Loading ...
Loading ...
UNPACKING AND CHECKING CONTENTS
NEEDED
Medium Screwdriver
........... Small Screwdriver
Wrenches
318 in. 7/16 in_
1/2 ino 9/16 im
Combination Square 3/4 in,,
COMBINATION SQUARE MUST BE TRUE°
STRAIGHT EDGE OF BOARD
3/Z THICK THI_ EDGE MUST
DRAW LIG_'{TL_N_ ON BE PERFECTLYSTRAIGHT
BOARDALO,._GTH,,,DGE '_._/.._ t"_i '
i
1
L.
/
i
SHOULD BE NO GAP OR OVERLAP
HEREWHEN SOUAR{_ISFLIPPED
OVER IN DOTTED POS_T_ON.
Model 113.242502 Motorized Table Saw is shipped
complete in one carton including Two Table Extensions
and Steel Legs.
Separate all parts from packing materials and check each
one with the illustration and the list of Loose Parts to make
certain all items are accounted for, before discarding any
pack ing material
If any parts are missing, do not attempt to assemble the
table saw, plug in the power cord or turn the switch on
until the missing parts are obtained and are installed
correctly,
Remove the protective oil that is applied to the table top
and edges of the tabie Use any ordinary household type
grease and spot remover
j R
S
S
T
M
T
c
X
SIZE
s T
v
CAUTION: Never use gasoline, naptha or similar highly
volatile solvents,,
Appfy a coat of automobile wax to the tabfe.
Wipe all parts thoroughly with a clean, dry cloth.
WARNING: FOR YOUR OWN SAFETY, NEVER
CONNECT PLUG TO POWER SOURCE OUTLET UNTIL
ALL ASSEMBLY STEPS ARE COMPLETE, AND YOU
HAVE READ AND UNDERSTAND THE SAFETY AND
OPERATIONAL INSTRUCTIONS,
LIST OF LOOSE PARTS
Item Part Name Qty,,
A Leg .................................................... 4
B Stiffener .................................... 4
C Table Extension ......................... 2
D Spreader Support .......................... I
E Blade Guard and Spreader ................. I
F Fence Guide Bar (Rear) ....................... 1
G Miter Gauge ................................................ 1
H Rip Fence ................................. 1
J Guide Bar Rod ............................ 1
K Arbor Nut Wrench .................. .......... t
L Arbor Wrench ............................... I
M Fence Guide Bar with IR_p Scale (Front) ......... 1
N Owners Manual ................................... 1
Pkg. of Miscellaneous Small Parts No, 62746
Consisting of the Following:
O Setscrew Wrench, 3/32 in .......................... 1
O Setscrew Wrench, 1/8 in ........................... ]
O Setscrew Wrench, 5/32 in...................... 1
O Setscrew Wrench, 3/16 in ....................... 1
P Switch Key ...................................... 1
Q Self-Threading Nut .......................... 2
R Hex Head Screw. 6116-18 x 1-314 in tong .... 2
R HexHaadScrew. B/T6-18x 1in long ...... 2
R Hex Head Screw, 6/16-18 x 5/8 in. long ....... 16
R Hex Head Screw, t/4-20 x I12 in. long .... 16
R Hex Head Screw, 1/4--20 x 5/8 in. long .... 2
S Hex Nut, 5/16-18
(approx. dla._ of hole 5/16 in,) .............. 20
S Hex Nut, 1/4--20
(approx, die, of hole 1/4 in,) ............... 18
S Hex Nut. 1/2--13
(approx. die, of hole 1/2 in.) ................. 8
T Lockwasher, B/16 in. External Type
(approx dia. of hote 5/16 in ................. 20
T Lockwasher, 1/4 in Externa_ Type
(approx. dia.. of hofe I/4 in .) ................. 18
U Guide Bar Spacer _............................ 2
V Thumbscrew, 5/16-18 x I in long ......... 1
W Leveling Foot ..................................... 4
2 Pkgs, of Miscellaneous Small Parts N0. 62745
for Table Extensions consisting of the Following;
Corner Support Bracket ............... 4
Corner Stiffener Bracket ................... 4
Truss Hd. Screw, 1/4--20 x 1 im long ....... I6
Hex Hd. Screw, 5/16--18 x 1-1/4 in. long . 8
Hex Nut; 1/4-20
(approx. die, Of hole 1 t4 in.) ................ 16
Hex Nut, 5/16--18
(approx, die. of hole 5/16 in ,) .............. 8
Lockwasher, 1/4 in, External Type
(approx, dia. of hole 1/4 in.) ........... 16
Loekwasher, 5/16 in. External Type
(approx., dla. of hole 5/16 in.} ........... 8
FIat Washer. ! 1/32 ....................... 8
w
Loading ...
Loading ...
Loading ...