Loading ...
Loading ...
Loading ...
Using a subwoofer
1
Select “Subwoofer”.
2
Enable the Sub Out (L) setting.
If you enable the IP control, “Subwoofer” will be disappeared and forced to change.
Adjusting the Low Pass Filter
When Subwoofer is set to on, you can limit the high frequency signal being
sent to your subwoofer.
1
Select “Subwoofer”.
2
Select “Low Pass Filter”.
3
Set the frequency cutoff point.
40 Hz / 60 Hz / 80 Hz / 90 Hz / 100 Hz / 110 Hz / 120 Hz
Adjusting the line out
1
Select “Line Out Level”.
2
Select “Fixed” to lock the volume at the optimal level or
select “Variable” to control the volume from the Now
Playing screen.
If you enable the IP control, “Line Out Level” will be disappeared and forced to
change.
Contents Setup Use Troubleshooting Status LED Appendix
44
Loading ...
Loading ...
Loading ...