Loading ...
Loading ...
Loading ...
30
Spirit Fitness
ENGINEERING MODE
Press Reset and Enter buttons for 2 seconds to enter Engineering Mode. The console will also beep for 1 second.
DISTANCE banner will blink rst. Press ▲ or ▼ button to select setting section. (Sound → ODO → Sound)
While in Engineering Mode if there is no activity for 30 seconds, the console will switch STANDBY Mode. Pressing the
Reset button will exit the Engineering Mode. The console settings and ODO will not be reset using the "RESET Mode",
however, removing the batteries will return the console to original factory settings and the ODO value will be zero.
AUDIO ON/OFF
• Under Engineering Mode of the Audio ON/OFF setting. The SOUND sign will blink. Press Enter to get into.
• After pressing Enter, the console will display “ON” or ”OFF”
• If the audio is on, the “ON” sign will blink.
• If the audio is off, the “OFF” sign will blink.
• Press Enter to conrm and the console will return to Engineering Mode.
• While in this setting if there is no activity for 30 seconds or pressing Reset, the console will switch STANDBY Mode.
ODO
The “ODO” feature displays the total time usage for your machine as H : M : S (hours, minutes, and seconds). Once the
time odometer reaches the 2-hour mark, the odometer will begin to display the time in 1-hour increments. For example,
“3H” would indicate 3 hours of total usage.
• When cycling through options in “Engineering Mode”, press enter when “ODO” is blinking on the display.
• When the total exercise time exceeds 1:59:59, the LCD will display the numerical hour number next to an “H” (hours).
• To exit, press the q or p button to switch between other Engineering modes.
• While in this setting if there is no activity for 30 seconds, the console will enter STANDBY Mode. Pressing the Reset
button twice will exit the Engineering Mode.
Loading ...
Loading ...
Loading ...