Loading ...
Loading ...
Loading ...
Page 11
DELETE ONE EXISTING OR PRESET USER CODE
The unit comes with a factory User ID = 01 for User Code = 1234.
IMPORTANT: To delete 1 User Code , the lock must have more than 1 User Code
in its database.
SET OR CANCEL AUTO LOCK
You can set the lock to automatically close after each time the lock is opened. Time
value range = 20 - 900 seconds, enter the following:
DELETE ALL USER CODES
IMPORTANT: this will delete the user codes but not the programming code, enter
the following.
Hear 1 beep and Light Indicator illuminates green.
Set Auto Lock:
Hear 1 beep and Light Indicator illuminates green.
To cancel Auto Lock set the time to 00, enter the following:
Cancel Time Value Auto Lock:
Hear 1 beep and Light Indicator illuminates green.
Hear 1 beep and Light Indicator illuminates green.
2 Existing re-enter
5 Time Value
5 00
3 re-enter
Deleting User Codes
Automatic Lock Function
PC
PC
PC
PC PC
ID
UC
UC
UC
ID ID
DISABLE:
While in Auto-Lock mode, unlock door using , within 10 seconds you must turn the
locking knob by hand to the locked position, wait more than 2 seconds then turn the
locking knob back to the unlock position. The Auto-Lock mode is now disabled.
RESTORE:
To restore the Auto-Lock funtion, turn the locking knob by hand to the locked position,
wait more than 2 seconds or press the
Lock button on the keypad.
Temporarily Disable Auto-Lock
PC
Loading ...
Loading ...
Loading ...