Loading ...
Loading ...
Loading ...
CUSTOMER RESPONSIBILITIES
YEARLY
REPLACE SPARK PLUG (Fig. 27)
The spark plug should be replaced each year to ensure
the engine starts easier and runs better. Spark plug gap
should be .025".
• Twist, then pull of spark plug boot.
• Remove spark plug from cylinder and discard.
• Replace with correct spark plug and re-tighten with
spark plug wrench (10-12 flJb.).
• Reconnect spark prug boot.
SPARKBOOTPLUGUG__ _SPARK
PLUG
Figure27
REPLACE FUEL FILTER (Fig. 28 & 29)
The fuel filter should be replaced after each season.
Never operate your unitwithouta fuel filter.Becareful not
to damage fuel line while removingthe fuel filter.
• Run fuel tank dry of fuel before proceeding with this
step.
i emove fuel cap and allowit tohang to side of motor.
Using a small pair ofneedle nose pliers,graspfuel cap
retainer, holdingit in tankopeningano pullout.
With cap out of tank, use a small section of bent wire
similar to that shownin theillustrationto catch fuel line
and stowly pull from tank.When fuel tilter appears in
opening, grasp withfingersand removefrom tank.
• Once filter is out of tank. holdfuet line close to fuel fil-
ter. Remove fuel filter by twisting and pulling at the
same time.
• Replace fuel filter.
• Reverse processfor installation.
•WIRE
FUEL LiNE
FUEL
F,L,," )
BARREL NECK
Figure 29
GEAR BOX LUBRICATION (Fig. 30)
• Removethegear box screwusing a wrench.
• Fill gear box with lithiumbase gear grease.
• Replaceand tighten gear box screw securely.
GEARBOX ,,_J "_i,_m_[..--_ GEARBOX
GEAR BOX
SCREW _
Figure 30
RETA|NER
Figure28
- 23 -
Loading ...
Loading ...
Loading ...