Loading ...
Loading ...
Loading ...
7 EN
Refrigerator / User Manual
Installation
Electrical connection
• Electrical connection must comply with national and local
regulations.
• Power cable plug must be within easy reach after installation.
• The specified voltage must be equal to your mains voltage.
• Do not make connections via extension cables or multi-plugs.
WARNING: Damaged power cable must be
replaced by the Authorized Service Agents.
WARNING: If the product has a failure, it should
not be operated unless it is repaired by the Authorized
Service Agent! There is the risk of electric shock!
Adjusting the feet
If the product stands unbalanced after installation adjust the
feet. Use another person to safely tilt the product during this
process.
WARNING: First unplug the product. Product
must not be plugged in when adjusting the feet. There
is the risk of electric shock!
Turn the front feet to balance the product. The corner where the
foot exists is lowered when you turn in the direction of arrow
and raised when you turn it in the opposite direction.
LED Lighting
Do not attempt to repair yourself. Call an Authorized Service
Agent if the LED lights do not go on or are out of order.
The lghts used n ths applance are not sutable for household
room llumnaton. The ntended purpose of ths lght s to assst
when loadng food n the refrgerator/freezer n a safe and
comfortable way.
Door Alarm
An audio warning signal will sound when the door of your
product is left open for 1 minute. This warning will be muted
when the door is closed or any of the display buttons (if any)
are pressed.
Remove the two screws at the top of the grlle. Add the ar buffer
bumpers usng the screws that were removed.
Loading ...
Loading ...
Loading ...