Loading ...
Loading ...
Loading ...
10 EN
Refrigerator / User Manual
Installation
Before using the water/
ice dispenser
• Water system of the refrigerator must be connected To the cold
water line.
It must not be connected to hot water line.
• No water may be obtained in the initial start-up of the refrigerator.
Because there is air in the system. To discharge air from the system,
press dispenser for 1-2 minutes until water comes from the
dispenser. Water flow may be irregular at the beginning. After the
air in the system is discharged, water flow will return to normal
place container under dispenser nozzle.
• The first 10 glasses of water should not be consumed.
• During initial use, you will have to wait approximately 12 hours to
cool the water.
• It will take around 1-2 days for the system to produce required
amount of ice.
• If the water dispenser is not used for a long period of time, first 1-2
glasses of water can be hot.
• If a power outage or a temporary failure occurs while the
refrigerator is operating, ice can melt down a little bit and then
get frozen again. In such a case, ice cubes can stick to each other.
If the outage or failure prolongs, ice can melt down causing water
leakage. If you experience such a problem, empty and clean the ice
container.
• Ice cubes can stick to each other if they are left in the container for
a long time.
• The water system installation of the refrigerator must be performed
by the Authorized Service Agent.
• If the product is to be connected to the water mains, make sure that
you use potable water.
• Water system of the product is designed to operate only with water.
Do not use beverage such as soft drinks and/or juices in the water
system.
• It is recommended that the water is disconnected if you will not be
using the refrigerator for a long period of time due to vacation or
similar reasons.
• Do not attempt to dismantle the ice container group assembly
parts.
• Do not attempt to clean the ice container assembly without
removing it from the refrigerator.
• When taking water from the water dispenser, remove the glass
from the opening 1 second after releasing the trigger. Thus, water in
the system will not drip into the drip tray.
Transportation of the product
1. Unplug the product before transporting it.
2. Remove water connections.
3. Secure the shelves, accessories, and drawers. in the
refrigerator by adhesive tape before repackaging it.
Packaging must be tied with thick tapes or strong
ropes and the rules of transportation printed on the
package must be followed.
Original packaging and foam materials should be kept
for future transportations.
WARNING: Packaging materials are dangerous
for the children. Keep packaging materials in a safe
place away from reach of the children.
Loading ...
Loading ...
Loading ...