Loading ...
Loading ...
Loading ...
.
Set the Console Assembly (91) face down on a
soft surface to avoid scratching the Console
Assembly. Hold the Right Handrail (33), which
has a large hole in one side, near the Console
Assembly.
Next, insert the console wire and the tie into the
hole in the side of the Right Handrail (33). Using
needlenose pliers, pull the console wire out of
the hole near the bracket on the Right Handrail.
See the inset drawing. Insert the included wire
tie through the indicated small hole in the Right
Handrail (33). Make sure that the console wire
has been secured to the side shown, and
tighten the wire tie.
Then, set the Right Handrail (33) on the Console
Assembly (91). Make sure that no wires are
pinched.
Tic
Bracket
33
91
Console
Wire
รท
Large
Hole
Small
.
Start an M5 x 16mm Screw (85) with an M5 Star
Washer (7) into the Right Handrail (33), and
then start two M4.2 x 19mm Screws (10) into the
Right Handrail. Tighten the M5 x 16ram Screw
and then tighten the two M4.2 x 19ram
Screws; do not overtighten the Screws.
Set the Left Handrail (not shown) on the Console
Assembly (91). Attach the Left Handrail to the
Console Assembly in the same way. Note:
There are no wires on the left side.
33
91
10
10
Loading ...
Loading ...
Loading ...