Loading ...
Loading ...
Loading ...
3. Have a second person hold the Base (52) in the
position shown.
Identify the Left Upright (53) (the Right Upright
[54] has a square hole near the lower end).
Hold the Left Upright (53) so that the small
holes are positioned as shown. Attach the Left
Upright (53) to the Base (52) with two M10 x
58mm Bolts (2) and two M10 Star Washers (9);
do not fully tighten the Bolts yet.
Attach the Right Upright (54) to the Base (52)
in the same way.
3
Small
Holes
53
Sql
Hole
54
52
2
/t
73
9
.
Position the Base (52) as close to the front of the
treadmill as possible, as shown.
See the upper inset drawing. Locate the wire
tie in the lower end of the Right Upright (54). Tie
the wire tie securely around the end of the Wire
Harness (39). Then, locate the other end of the
wire tie in the upper end of the Right Upright.
Pull the upper end of the wire tie until the Wire
Harness extends from the upper end of the Right
Upright. Secure the Wire Harness to the Right
Upright so that it will not fall inside.
See the lower inset drawing. Press the indi-
cated Grommet (49) into the Right Upright (54).
4
54
52
39
49
-54
Tie
Loading ...
Loading ...
Loading ...