ProForm 831248030 User's Manual

Loading ...

PROBLEM: The crosswalk arms squeak during use

SOLUTION: a.

(Note: Correcting this problem requires a small

amount of white marine grease, available at hard-

ware stores.) Turn the Resistance Knob (A) coun-

terclockwise and remove it. Next, remove the

Resistance Cone (B) and the Left Crosswalk Arm

(73), along with the Resistance Plate (C), Washers

(D), Spring Washer (E), Thrust Washers (F), and

Thrust Bearing (G). (Note: If the Resistance Plate

[C] comes out of the Resistance Cone [B], press it

back in.) Apply a thin layer of white marine grease

to the outer surface of the Resistance Cone (B).

Then, reattach all parts in the order shown at the

right.

PROBLEM: The incline of the treadmill does not change correctly

SOLUTION: a. With the key in the console, press one of the Incline buttons. While the incline is changing, re-

move the key. After a few seconds, re-insert the key. The treadmill will automatically rise to the

maximum incline level and then return to the minimum level. This will recalibrate the incline system.

Loading ...

ProForm 831248030 Crosswalk 380 Treadmill Exercise