Loading ...
Loading ...
Loading ...
.
Remove the ties from the Cage Nuts (105) in the
Right Handrail (33) and the Left Handrail (not
shown). If necessary, press the Cage Nuts back
into place. With the help of a second person, hold
the Console Assembly (91) near the Right Upright
(54).
Connect the Wire Harness (39) to the console
wire. See the inset drawing. The connectors
should slide together easily and snap into
place. If they do not, turn one connector and try
again. IF THE CONNECTORS ARE NOT CON-
NECTED PROPERLY, THE CONSOLE MAY
BE DAMAGED WHEN THE POWER IS
TURNED ON. Insert the connectors and the ex-
cess wire downward into the Right Upright (54).
Remove the wire tie from the Wire Harness.
33
105
39--_
©
54_
Console
Wire Wire.
Wire
iTie
10. Start four M8 x 15mm Bolts (8) with four M8
Star Washers (5) into the Uprights (53, 54).
Then, firmly tighten all four M8 x 15ram
Bolts.
10
8 5
54
11
Loading ...
Loading ...
Loading ...