Loading ...
Loading ...
3
CONTENTS
ELECTRICAL SAFETY
ELECTRICAL SAFETY
To protect against electric shock, do not immerse cord or plugs (if equipped) in water or other liquid.
Unplug from the outlet (if applicable) when not in use and before cleaning. Allow to cool before putting
on or taking off parts.
Do not operate any outdoor cooking gas appliance with a damaged cord, plug, or after the appliance
malfunctions or has been damaged in any manner. Contact the manufacturer for repair.
Do not let the cord hang over the edge of a table or touch hot surfaces.
Do not use an outdoor cooking gas appliance for purposes other than intended.
When connecting, fi rst connect plug to the outdoor cooking gas appliance then plug appliance into the outlet.
Use only a properly wired and inspected 120VAC (15 AMP minimum) GFCI GROUNDED 3-wire
receptacle with this outdoor cooking gas appliance.
Never remove the grounding plug or use with an adapter of 2 prongs.
Use only extension cords with a 3 prong grounding plug, rated for the power of the equipment, and
approved for outdoor use with a W-A marking.
REV 0 - 1601191055
L-C2-448
GETTING STARTED
ELECTRICAL SAFETY ........................................................3
ELECTRICAL SAFETY .....................................................3
DOUBLE SIDEBURNER PARTS LIST ................................4
MODEL SPECIFICATIONS ..................................................5
COUNTERTOP OVERHANG ............................................5
Model Specifi cations Table ................................................5
COMBUSTIBLE ENCLOSURE CUT-OUT ..........................6
SUBSTRATE ....................................................................6
DOUBLE SIDEBURNER DIMENSIONS TABLE .................7
DOUBLE SIDEBURNER WIRING DIAGRAM ....................7
MAINTENANCE AND SAFETY INFORMATON ..............8
ELECTRICAL CONNECTIONS .........................................8
INSTALLATION REQUIREMENTS ....................................9
ENSURE PROPER COMBUSTION AIR AND
COOLING AIRFLOW
.....................................................10
GAS-SUPPLY PLUMBING REQUIREMENTS ..................10
ENCLOSURE REQUIREMENTS .......................................11
VENTILATION (ALL ENCLOSURES)...............................11
WHEN A PROPANE (L.P.) CYLINDER IS USED IN
THE ENCLOSURE
.........................................................11
PROPANE SAFETY INFORMATION ................................12
WARNING .....................................................................12
INSTALLATION SAFETY GUIDELINES ........................... 12
OPERATING THE UNIT SAFELY AND CORRECTLY ....12
SAFE USE & MAINTENANCE OF
PROPANE GAS CYLINDERS ............................................13
INSTALLATION
INSTALLATION .................................................................. 15
COUNTER PREPARATION ............................................. 15
CONNECT THE GAS SUPPLY ......................................... 15
CONNECT TO A POWER SOURCE ................................. 16
POWER SUPPLY (MULTIPLE ACCESSORY UNITS) ........ 18
SLIDE UNIT INTO ENCLOSURE .................................... 19
POSITION THE BURNER CAPS ..................................... 19
USE, CARE, & SERVICE
LIGHTING (IGNITION) INSTRUCTIONS ........................ 21
ELECTRONIC LIGHTING .............................................. 21
MANUAL LIGHTING...................................................... 21
SHUTTING OFF THE UNIT ........................................... 21
CARE & CLEANING .......................................................... 22
CONVERT GAS TYPE / CHECK BURNER ORIFICES ... 23
AIR SHUTTER ADJUSTMENT.......................................... 25
CONTROL PANEL REMOVAL .......................................... 26
TROUBLESHOOTING ....................................................... 27
WARRANTY ........................................................................ 28
Loading ...
Loading ...
Loading ...