Loading ...
Loading ...
WARNING:
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.
Never modify the product or any part of it. Damage or personal injury could result.
To reduce the risk of injury, read the instruction manual.
IMPORTANT SAFETY INSTRUCTIONS WARNING: Only persons who have read and understand the tool
operating/safety instructions should operate the tool.
WARNING:
Actuating tools may result in flying debris, collation material, or dust which could harm the operator’s eyes.
Operators and others in the work area MUST wear safety glasses with side shields.
These safety glasses must conform to ANSI Z87.1 requirements (approved glasses have “Z87” printed or
stamped on them).
The employer is responsible for enforcing the usage of eye protection equipment by the tool operator and all
other personnel in the work area.
Always assume that the tool contains fasteners.
WARNING:
Do not use oxygen, combustible gases, or bottled gases as a power source for this tool as a tool may explode,
possibly causing injury.
Do not use supply sources that can potentially exceed 200 p.s.i.g. (14 kg/cm2) as a tool may burst, possibly
causing injury.
The connector on the tool must not hold pressure when the air supply is disconnected.
If a wrong fitting is used, the tool can remain charged with air after disconnecting and thus will be able to drive
a fastener even after the air line is disconnected possibly causing injury.
Loading ...
Loading ...
Loading ...