Loading ...
Loading ...
Loading ...
Problem
I
Probable cause(s)
I
Suggested remedy
I Reference
page(s)
When there is a television set nearby
The picture on the TV The location and orientation of the antenna
disappears or stripes are incorrect.
appear on the screen. The wiring at the back of the system is
unsuitable.
If you are using an indoor antenna, change
to an outdoor antenna.
Separate the antenna wire of the TV set
from the system.
7
When listening to tapes
Sound is low, intermittent, Heads are dirty.
poor quality, noisy,
scratchy, or unsteady.
The deck does not enter The erase-prevention tabs are removed
the recording mode. from the cassette.
Clean the heads.
Attach tape to cover the space left by
removal of the erase-prevention tabs.
35
33
While listening to compact discs
Set the disc with the label facing upward.
Wipe the disc with a soft cloth.
Replace the disc with a new one.
The display does not show
the correct indication.
Disc play does not start
when you press the play
button.
A certain music passage
can't be played correctly.
The disc label is upside down.
The disc is dirty.
The disc is scratched.
The disc is badly warped.
The disc is a nonstandard one.
There is condensation inside the CD
changer.
The disc is dirty.
Replace the disc with a different one.
Wait for 60 minutes before using the CD
player.
Wipe the disc with a soft cloth.
13
33
33
33
While using the remote control
The system cannot be The batteries are installed in the reverse
operated with the remote polarity.
control. The batteries are run-down.
Re-insert the batteries in the correct
polarity.
Replace the batteries with new batteries.
5
5
I If the surfaces are dirty I
To clean this unit, wipe with a soft, dry cloth.
If the surfaces are extremely dirty, use a soft cloth dipped in a soap-
and-water solution or a weak detergent solution.
oNever use alcohol, paint thinner, benzine, or chemically treated
cloths to clean this unit.
oBefore using chemically impregnated cloth, rea_dthe instructions
that came with the cloth carefully.
For a cleaner crisper sound I
We recommend that you periodically clean parts (the shaded por-
tion in the figure below) the tape contacts like the heads.
Do not use any solution other than alcohol for head cleaning.
t=
q)
=€
Loading ...