Loading ...
Loading ...
Loading ...
|
I=
i
r
,,,,I
s,.o "-";:-;;'--;D-:,-2"-;:---1
:-,,o ,.:J- 1......= j
TUNED •
STEREO
i
_1 Press TUNER BAND to select band.
The power will come on automatically.
Every time you press the button; =FM"<--->=AM".
E!
Press TUNE MODE to select "PRESET" or
"MANUAL".
Every time you press the button; "MANUAL'<-->_..J:IESET'.
PRESET: For preset stations
MANUAL: For non-preset stations
Press v or ^ to select the desired broadcast.
"STEREO" lights when an FM stereo broadcast is being re-
ceived. "TUNED" lights when you precisely tune in a broadcast
station.
I_1 Adjust the volume level.
I uto tuning I
Auto tuningis an easy way to tune in non-presetstationsin the
=MANUAL"mode.
Hold down either v or ^, and release the button when the fre-
quency starts scrolling.
The radio will stop automatically on the first station it picks up.
=When there is outside interference, the radio sometimes stops on
a certain frequency where no station is broadcasting.
To stop auto tuning
Press either v or ^ again.
If noise is excessive in the FM stereo mode [] ]
Press FM MODE/BP. "MONO" will light up.
Sound will be produced in monaural, but this also reduces noise.
Press the button again to cancel. "MONO" will go out.
Normally, you'll want to listen in stereo, so leave "MONO" off. This
way, you can listen to stereo broadcasts in stereo, and monaural
broadcasts in mono.
You can preset an FM station in monaural by following the steps un-
der "Presetting only your favourite stations" on page 11.
After selecting the station in step 1, select "MONO" with FM MODE/
BP, then continue with step 2 and 3.
elf you preset stations in memory, you can tune in a preset station
by simply selecting the preset channel with the numeric buttons on
the remote control.
1. Press TUNER on the remote control.
2. Press the numeric button(s) to select the preset channel.
To select a two-digit station.
Press >10 and then the two numbers you want within 10 sec-
onds.
=Sound is momentarily interrupted if you load/unload tapes while lis-
tening to an AM broadcast. -,,,,
Loading ...
Loading ...
Loading ...