Loading ...
Loading ...
Loading ...
DECK2
i _ __i[................... _ 1
.... ...o..o.. ..... .°o.°°o..°.o..._°°o,..°.
F 1,4 FI _ F ='/
,__'_-2.'_'_t5:--_'___-___.1
Press DECK 2 _ OPEN and insert the tape.
Close the holder by hand.
Tape direction is automatically set to "1_'.
FI
Press REV MODE to select the reverse mode.
Every time you press the button;
--* _)---->C :)
I
_: One side is recorded, then recording stops auto-
matically.
_, ¢__:_: Both sides (front side-,reverse side) are recorded,
then recording stops automatically.
[_1 Select a radio station. Perform steps I through
3 on page 12.
Press • REClSTOP to start recording.
_llf you selected ¢___ in step 2, the direction will automatically
change to _ when recording starts.
To stop recording
Press • REC/STOP again.
Recording can also be stopped by pressing II.
To start recording on the reverse side
Load a tape and change the tape direction as following.
1. Press TAPE DECK 1/2 and select tape deck 2.
2. Press <1and immediately thereafter II. The tape direction will be
shown as "<".
To recordfrom a specificpoint on a tape
Before recording,advance the tape to the pointfrom where you
wanttostartrecording.
To cut an unnecessary part while recording
_ 1. Press • REC/STOP during the unnecessary part. The cassette
_._ deck will go into the stop mode.
2. Press • REC/STOP to resume recording again.
Recording will continue in the same direction as before.
When recording an AM broadcast, sound is momentarily inter-
rupted when you start and stop the recording.
u_
0
ta
=€
t
I To reduce noise while AM recording I
(Beat proof function) []
I
Press FM MODE/BP while recording.
Each time you press the button, BP 1 and BP 2 will be displayed al-
ternately.
Select the position where there is less noise.
Loading ...
Loading ...
Loading ...