Loading ...
Loading ...
Loading ...
m
1!
Basic Troubleshooting
We've worked hard to make your HaloTM UV-ST Ultraviolet Vacuum operate as
trouble-free and maintenance-free as possible, but in the event that you experience
difficulties, please read through these trouble-shooting recommendations:
Before Troubleshootin9: Turn off your HaloTM UltravioletVacuum, unplug itand allow
it to cool down. Failure to do so could result inelectrical shock or personal injury.
The unit will not turn ON
1. Make sure it is plugged into a wall outlet.
2. Check to see if the plug or cord isdamaged.
3. Check for a blown fuse or tripped circuit breaker in the household.
The unit stops runnin9
1. Is the dust filter bag full? Replace if needed.
2. See Overheating Cutoff on Page ! 1.
The unit has bad dust pick-up
1. Check to see if the HEPA disposable dust filter bag is full. Replace if needed.
2. Adjustthe heightsetting.The brush bar must reston thecarpet foreffectivecleaning.
3. Brush bar not spinning? Press the ON/OFF button. If it isstill not spinning, then
press the BRUSH ON/OFF button directly below the ON/OFF button while the
product is ON. Please ensure that the attachment hatch is firmly closed. The
brush bar cannot be operated while the attachment hatch is open.
4. Brush bar still not spinning? Turn the unit OFF,then press the Reset button on
the bottom corner of the product.
5. Can the brush bar turn freely? Make sure fibers, strings or hair are not wrapped
around the brush bar.
If you continue to have trouble, pleasecontact a reputablevacuum service center or
contact HaitiMCustomerServiceat !-866-638-HALO (4256) or gethalo.com.
Loading ...
Loading ...
Loading ...