Loading ...
Loading ...
Loading ...
50
W415-1401 / C / 03.18.15
EN
Combustible Mantel clearance can vary according to the Mantel depth. Use the graph
to help evaluate the clearance needed. These same requirements apply to any
combustibles protruding on either side of the appliance.
TOP OF APPLIANCE
8" [203mm]
MANTEL
8"
[203mm]
6"
[152mm]
4"
[102mm]
2" [51mm]
2" [51mm]
4" [102mm]
6" [152mm]
!
WARNING
RISK OF FIRE, MAINTAIN ALL SPECIFIED AIR SPACE CLEARANCES TO COMBUSTIBLES. FAILURE
TO COMPLY WITH THESE INSTRUCTIONS MAY CAUSE A FIRE OR CAUSE THE APPLIANCE TO
OVERHEAT. ENSURE ALL CLEARANCES (I.E. BACK, SIDE, TOP, VENT, MANTEL, FRONT, ETC.) ARE
CLEARLY MAINTAINED.
WHEN USING PAINT OR LACQUER TO FINISH THE MANTEL, THE PAINT OR LACQUER MUST BE
HEAT RESISTANT TO PREVENT DISCOLOURATION.
73.1
5.6 MINIMUM MANTEL CLEARANCES
0
$
1
7
(
/
+
(
,
*
+
7
2" (51mm)
24681012
MANTEL DEPTH (INCHES)
4" (102mm)
6" (152mm)
10" (254mm)
12" (305mm)
5.7 NAILING TAB INSTALLATION
55.2
A. To determine the fi nal location and where to bend the nailing tabs you must
fi rst determine the thickness of your fi nishing material (i.e. drywall). This will
determine the dimension from the front edge of the corner post to the nailing
tab. Once the desired tab has been choosen, bend and secure to the framing.
Loading ...
Loading ...
Loading ...