Loading ...
Loading ...
Loading ...
ge.com
Oventemperaturetoo
hotor toocold
Possible Causes
Oven thermostat
needs adjustment.
What ToDo
• Seethe Adjust the oven thermostat-Easy to do
yourself! section.
Clock and timer do Plug on range is not completely • Make sure electrical plug is plugged into a live, properly
not work inserted in the electrical outlet, grouuded outlet.
A fuse ha your home may be • Replace fl/se or reset circuit breakeI:
blown or the circuit breaker
tripped.
Oven controls improperly set. • See tile Using the clock and timer section.
Oisplaygoes blank A fuse ha your home may be • I_eplace tile fl/se or reset the circtfit breaker.
blown or the circuit breaker
tripped.
The dock is turned off from • See the Using the clock and timersectiou.
showhag ha the displa_
Oven dooris crooked The door is out of position. • gecatlse the oveu door is removable, it sometimes gets
out of position duriug installation. To straighteu tile
door, lmsh (h>wu on the high corner.
Oven makes This is the sound of the • This is normal.
clicking noise heating element turnhag
off and on during
cooking functions.
"F--and a number You have a function error code. • Press the CLEAR/OFFpad. Put the oveu back
or letter" flash in into operation.
the display If the function code repeats: • Dis(ouuect all power to the range tor at least 30
secouds aud theu reconuect l)ower. ]f the traction
error code repeats, call for service.
• Ou sell:cleauiug models, if a flmctiou error code
al/pea_s during tile sell:cleauiug cycle, check the oveu
door latch. The latch may have beeu moved, if only
slightly, fl'om the locked position. Make sure the latch
is moved to the right as tar as it will go. Press the
CLEAR/OFFpad. Allow the oven to cool fin" one horn'.
Put the oven back into operation.
Power outage Power outage or surge. • Some models will automatically resume their setting once
tile power is restored. On models with a clock, you must
reset tile clock. If tile oven was in use, you must reset it by
Ilressin°_ _ tile CLEAR/OFFpad,setting, tile clock and
resetting any cooking traction.
Display flashes Power faJhtre. • Reset the clock.
Unable to get the display Oven control pads were not
to show "SF" pressed properly.
• Tile BAKE',rod BROIL HI/LO pads must be pressed ;It tile
same time and held for 3 seconds.
45
Loading ...
Loading ...
Loading ...