1. Home
  2. Delonghi
  3. Delonghi ESAM5600SL User Manual
  4. Page 24

User Manual - Page 24

For ESAM5600SL.

Loading ...
Loading ...
Loading ...
22
DISPLAYED MESSAGE POSSIBLE CAUSE SOLUTION
INSERTMILKCONTAINER
•Themilkcontainerisnotinsertedcorrectly.•Insertthemilkcontainerasfarasitwillgo.
CLOSEDOOR!
•Theservicedoorisopen•Closetheservicedoor.
PRESS CLEAN BUTTON
•Milkhasbeendeliveredrecentlyandthetubes
inside the milk container must be cleaned.
•PresstheCLEANbuttonandkeepitpresseduntilthe
progress bar which appears on the display together
with the message “Cleaning...” is complete.
Energy Saving
•Thefunctionisactiveandreduceselectricity
consumption.
•Disablethefunctioninthemenu(seesection:
“Energy Saving”).
GENERALALARM!
•Theinsideoftheapplianceisverydirty.
•Cleantheinsideoftheappliancethoroughly,as
described in the section “Cleaning”. If the message is
still displayed after cleaning, contact a service center.
TROUBLESHOOTING
Below is a list of some of the possible malfunctions.
If the problem cannot be resolved as described, contact a Service Center.
PROBLEM POSSIBLE CAUSE SOLUTION
The coee is not hot
•Thecupswerenotpreheated.•Enablethecupwarmer,leavethecupsatleast20
minutes to warm up.
•Warmthecupsbyrinsingthemwithhotwater
(using the hot water function).
•Theinfuserhascooleddownbecause2/3minutes
have elapsed since the last coee was made.
•Beforemakingthecoee,heattheinfuserby
pressing the
icon (see the sections “Tips for a
hotter coee”).
•Alowcoeetemperatureisset.•Setahighcoeetemperatureinthemenu.
The coee is not creamy
enough.
•Thecoeeisgroundtoocoarsely.•Turnthegrindingadjustmentdialoneclick
anticlockwise towards “1” while the coee mill is
in operation (g. 10). Continue one click at a time
until coee delivery is satisfactory. The eect is only
visible after delivering 2 coees.
•Wrongtypeofcoee•Useatypeofcoeeforespressocoeemakers.
The coee is delivered too
slowly or a drop at a time.
•Thecoeeisgroundtoonely.•Turnthegrindingadjustmentdialoneclickclockwise
towards “7” while the coee mill is in operation
(g. 10). Continue one click at a time until coee
delivery is satisfactory. The eect is only visible after
delivering 2 coees.
The coee does not come out
of the spouts, but from around
the service door.
•Theholesinthespoutsarecloggedwithdrycoee
dust.
•Cleanthespoutswithatoothpick,spongeorhard
bristled kitchen brush.
•Thecoeeguideinsidetheservicedoorisblocked
and cannot swing.
•Thoroughlycleanthecoeeguide,particularlynear
the hinges.
Loading ...
Loading ...