ESAM5600SL User Manual

Loading ...

(When in the settings MENU, they change function ac-

cording to the text shown above the icon).

C8. CAPPUCCINO icon: to deliver a cappuccino.

C9. CAFFELATTE icon: to deliver a caelatte.

C10. Selection icon to choose the coee quantity.

(When in the settings MENU, it changes function accor-

ding to the text shown above the icon).

C11. icon: to activate the hot water function.

C12. P icon: to access or exit the settings menu.

Please Note :

A light touch is enough to activate the icon.

Meaning of animations

Below is an explanation of the animations describing the ope-

ration the appliance is currently performing:

RINSING.

HEATING UP.

IMPORTANT MESSAGE

(see section: “Displayed messages”).

PLEASE WAIT...

FILLTANK!

HOT WATER

PRELIMINARY CHECKS

Checking the appliance

After removing the packaging, make sure the product is com-

plete and undamaged and that all accessories are present. Do

not use the appliance if it is visibly damaged. Contact De’Longhi

Customer Services. Please see enclosed guarantee leaet.

Installing the appliance

Important!

When you install the appliance, you should respect the fol-

lowing safety warnings:

•Theappliancegivesoheat.Afterpositioningtheap-

pliance on the worktop, leave a space of at least 3 cm

between the surfaces of the appliance and the side and

rear walls and at least 15 cm above the coee maker.

•Waterpenetratingtheappliancecouldcausedamage.Do

not place the appliance near water faucets or sinks.

•Theappliancecouldbedamagedifthewateritcontains

freezes. Do not install the appliance in a room where the

temperature could drop below freezing point.

•Arrangethepowercableinsuchawaythatitcannotbe

damaged by sharp edges or contact with hot surfaces

(e.g. electric hot plates).

Connecting the appliance

Important!

Check that the mains power supply voltage corresponds to

the value indicated on the rating plate on the bottom of the

appliance.

Connect the appliance to an eciently earthed and correctly

installed socket with a minimum current rating of 10A only.

If the power socket does not match the plug on the appliance,

have the socket replaced with a suitable type by a qualied

professional.

Using the appliance for the rst time

Please Note :

•Coeehasbeenusedtofactorytesttheapplianceandit

is, therefore, completely normal for there to be traces of

coee in the mill. The machine is, however, guaranteed to

be new.

•Youshouldcustomizewaterhardnessassoonaspossible

following the instructions in the section “Setting water

hardness” on page 19.

1. Plug the appliance into the mains socket and place the

main switch on the back of the appliance in the I position

(g. 1).

You must rst choose the language on the display (the langua-

ges scroll through at intervals of about 3 seconds).

2. When English appears, press the selection icon corre-

spondingtoOKonthedisplayforafewseconds(g.2).

Once the language has been saved, the message “English

installed” is displayed.

Follow the instructions indicated by the appliance:

3.“FILLTANK!”:removethewatertank,lltotheMAXline

with fresh water then replace in the appliance (g. 3).

4.“INSERTWATERSPOUT!“:Checkthatthehotwaterspoutis

inserted on the nozzle and place a container with a mini-

mum capacity of 100 ml underneath (g. 4).

Loading ...

User Manual - Page 12