ESAM5600SL User Manual

Loading ...

5.“PressOK”:thenpresstheiconcorrespondingtoOKonthe

display (g. 2). “Please wait...” is displayed and the applian-

ce begins to deliver water from the hot water spout.

The appliance ends the rst start up procedure and goes o.

The coee maker is now ready for normal use.

Please Note:

•Whenusingtheapplianceforthersttime,youneedto

make 4/5 cups of coee or 4/5 cappuccinos before the ap-

pliance starts to give satisfactory results.

TURNING THE APPLIANCE ON

Please Note:

Before turning the appliance on, make sure the main switch on

the back of the appliance is in the I position (g. 1).

Each time the appliance is turned on, it performs an automatic

preheat and rinse cycle which cannot be interrupted.

A drop animation indicates that rinsing is underway (see sec-

tion “Meaning of animations”).

The appliance is ready for use only after completion of this

cycle.

Danger of burns!

During rinsing, a little hot water comes out of the coee spouts

and is collected in the drip tray underneath.

Avoid contact with splashes of water.

•Toturntheapplianceon,pressthe

button (g. 5).

The appliance begins the heating cycle indicated by a

thermometer icon (g. 6) which lls as the cycle advan-

ces. During heating, the machine performs an automatic

rinse cycle: as well as heating the boiler, the appliance

also heats the internal circuits by circulating hot water.

Once heating is complete, the appliance shows the time and

the coee taste and quantity selection bars set to the standard

values (“standard” quantity and taste). The coee maker is now

ready for use.

TURNING THE APPLIANCE OFF

Each time the appliance is turned o, it performs an automatic

rinse cycle which cannot be interrupted.

Important!

To avoid damaging the appliance, always press the

(g.

5) button to turn o.

Danger of burns!

During rinsing, a little hot water ows from the coee spouts.

Avoid contact with splashes of water.

To turn the appliance o, press the

button (g. 5). The

appliance performs the rinse cycle then goes o.

Please Note:

If the appliance is not used for an extended period, place the

main switch in the 0 position (g. 7).

Important!

Never place the main switch in the 0 position while the ap-

pliance is on.

MENU SETTINGS

The settings menu is divided into 3 sections indicated by dierent icons.

Each section is divided into groups as described below:

SETTINGS

•Language

•EnergySaving

•Coeetemperature

•Waterhardness

•Displaycontrast

•Beep

•Defaultvalues

MAINTENANCE

•Descaling

•Statistics

CLOCK

•Adjusttime

•Auto-Start

•Auto-O(Stand-by)

To access the required section, press the P icon and use the se-

lection icons (C4 and C10) to scroll until the image you want is

displayed. Then press the icon to conrm (or the P icon

again to exit).

Please Note!

When navigating in the settings menu and you want to exit,

press the P icon a number of times.

Setting the language

To modify the language on the display, proceed as follows:

1. Choose the “SETTINGS” section as described above;

2. Press the selection icons < or > until “Language” is displa-

yed;

Loading ...

User Manual - Page 13