Loading ...
Loading ...
Loading ...
16
Please Note!
If during delivery you want to stop preparing milk, press the
CAPPUCCINO icon or interrupt preparation of the coee by
pressing the icon.
Making macchiato
1. After attaching the milk container (see previous section),
position the froth regulator on LATTE MACCHIATO (g. 27)
printed on the milk container lid.
2. Press the LATTE MACCHIATO icon (g. 28). A glass is di-
splayed and gradually lls as preparation progresses. Af-
ter a few seconds, frothed milk ows out of the milk spout
into the glass below. Milk delivery stops automatically
and coee delivery begins.
3. At the end of delivery, the machine is automatically ready
for use again.
Please Note!
If during delivery you want to stop preparing milk, press the
LATTE MACCHIATO icon or interrupt preparation of the coee by
pressing the icon.
Making milk
1. After attaching the milk container (See section: “Filling
and attaching the milk container”), position the froth re-
gulator according to the quantity of froth you require (pos.
3 caelatte = little froth; pos. 1 cappuccino = abundant
froth).
2.PresstheMILKicon(g.29).Aglassisdisplayedandgra-
dually lls as preparation progresses. After a few seconds,
frothed milk is delivered from the milk spout into the cup
below.
3. After delivery, the machine is automatically ready for use
again.
Please Note!
If during delivery you want to stop preparing milk, press the
MILK icon once.
Cleaning the milk container after use
Important! Danger of burns
When cleaning the internal tubes of the milk container, a little
hot water leaks out of the frothed milk tube (B5). Avoid contact
with splashes of water.
When “Press CLEAN button” ashes on the display (each time
you use a milk function):
1. Leave the milk container in the machine (you do not need
to empty it);
2. Place a cup or other recipient under the frothed milk spout
(g. 21).
3. Press the CLEAN button (g. 30) and keep pressing until
the progress bar which appears on the display together
with the message “Cleaning...” is complete.
4. Remove the milk container and always clean the nozzle
with a sponge (g. 31).
Please Note!
•When“PressCLEANbutton”ashesonthedisplay,youcan
still prepare any type of coee or milk. If you have to make
a number of drinks with milk, wait until you have delive-
red the last cup before cleaning the container.
•Themilkleftinthecontainercanbekeptintherefrigera-
tor.
•Insomecases,tocleanyoumustwaitfortheapplianceto
heat up, holding the CLEAN button down.
Programming the quantities of coee and milk in the
cup
The appliance is set by default to automatically deliver stan-
dard quantities.
To change these quantities, proceed as follows:
1. Place a cup/glass under the coee spouts and milk spout
(g. 21).
2. Press the icon corresponding to the function you want to
program until “Program Quantity Milk For...” is displayed
together with the
or icon according to the fun-
ction selected.
3. Release the icon. The appliance starts delivering milk.
4. When the required quantity of milk has been delivered
into the cup, press the icon again.
5. After a few seconds, the appliance starts delivering coee
into the cup and the message “Coee for... Program quan-
tity”isdisplayed(withtheexceptionoftheMILKfunction)
and the icon ashes.
6. As soon as the coee in the cup reaches the required level,
press the icon. Coee delivery stops.
The machine is now reprogrammed with the new quantities.
HEATING WATER
Preparation
Important! Danger of burns.
Never leave the machine unsupervised while delivering hot
water.
The hot water spout becomes hot while water is delivering and
must be handled by the handle only.
1. Make sure the hot water spout is attached correctly (g.
4).
2. Place a container under the spout (as close as possible to
Loading ...
Loading ...
Loading ...