Loading ...
Loading ...
Loading ...
16
IHSL24UL MAXIMUM WIRE LENGTH
AMERICAN
WIRE
GAUGE
(AWG)
STANDARD OPERATOR 3PHCONV kit powering operator + heater + 1 Amp on outlets
120 VAC, 13 A
(includes fully
loaded outlets)
120 VAC, 7 A 240 VAC, 3.5 A 208 VAC, 5.2 A 240 VAC, 4.5 A 480 VAC, 2.3A 575 VAC, 1.9 A
14
75 140 600 330 440 1,700 2,500
12
120 225 900 525 700 2,700 4,000
10
200 360 1,440 840 1,100 4,400 6,300
8
300 600 2,300 1.300 1,800 6,900 10,000
6
500 900 3,600 2,100 2,800 11,000 16,000
4
800 1,400 5,800 3,400 4,500 17,000 25,000
Chart assumes: copper wire, 65°C, 5% drop
All control wiring used to connect external devices to Class 2 circuits of the operator must be (QPTZ) Power-Limited Circuit Cables, Type CL2, CL2P,
CL2R, or CL2X or other cable with equivalent or better electrical, mechanical, and flammability ratings.
1. Turn off the AC power from the main power source circuit breaker.
2. Run the AC power wires to the operator.
3. Make sure the operator AC switch is in the OFF position, see page
16.
4. Remove the junction box cover from the electrical box by loosening
the screws and sliding the cover to the side.
5.
120 Vac: Factory default is 120 Vac. Skip to 6.
240 Vac: Unplug the power wiring connector from the 120 Vac
socket (factory default location) and plug it into the 240 Vac socket.
NOTE: The accessory outlets are disabled and cannot be used with
the 240 Vac option.
6. Connect the incoming green wire to the earth ground nut.
7. Connect the white wire to NEUTRAL using a wire nut.
8. Connect the black wire to HOT using a wire nut.
9. Replace the junction box cover. Ensure the wires are not pinched.
Power Wiring
Connector
EMI Board
Incoming
Power
White
Black
Green ground wire
AC Power Switch
The AC switch on the operator turns the incoming 120/240 Vac power
ON or OFF. The AC switch ONLY turns off AC power to the control board
and DOES NOT turn off battery power.
Battery Switch
The battery switch turns the battery power on or off.
AC Power SwitchBattery Switch
INSTALLATION
Loading ...
Loading ...
Loading ...